CLI Guide

Layer 3 Routing Commands 1457
Interface Interface Mode Operational-Status
--------- -------------- ------------------
show ip dvmrp interface
Use the show ip dvmrp interface command to display the interface
information for DVMRP on the specified interface.
Syntax
show ip dvmrp interface vlan vlan-id
• vlan-id — Valid VLAN ID.
Default Configuration
This command has no default condition.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays interface information for VLAN 11 DVMRP.
console(config)#show ip dvmrp interface vlan 11
Interface Mode................................. Enabled
Interface Metric............................... 5
Local Address.................................. 10.1.0.2
Received Bad Packets........................... 0
Received Bad Routes............................ 0
Sent Routes.................................... 0
show ip dvmrp neighbor
Use the show ip dvmrp neighbor command to display the neighbor
information for DVMRP.