CLI Guide

Dell EMC Networking CLI 113
Ethernet CFM
show interfaces trunk Display active trunk interface information. PE or
GC
show statistics Displays statistics for one port or for the entire
switch.
PE
show statistics switchport Displays detailed statistics for a specific port or
for the entire switch.
PE
show storm-control Displays the storm control configuration. PE
show storm-control action Displays the storm control action configuration
for one or all interfaces.
PE
shutdown Disables interfaces. IC
speed Configures the speed of a given Ethernet
interface when not using auto-negotiation.
IC
switchport protected Sets the port to Protected mode. IC
switchport protected name Configures a name for a protected group. GC
show switchport protected Displays protected group/port information. PE
show system mtu Displays the configured MTU. PE
system jumbo mtu Globally configures the Maximum Transmission
Unit (MTU) on all interfaces for forwarded and
system-generated frames.
GC
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a
ethernet cfm domain Enters into maintenance domain Configuration
mode for an existing domain. Use the optional
level parameter to create a domain and enter
into maintenance domain Configuration mode.
GC
service Associates a VLAN with a maintenance domain. MDC
ethernet cfm cc level Initiates sending continuity checks (CCMs) at
the specified interval and level on a VLAN
monitored by an existing domain.
GC
Command Description Mode
a