Manualshelf

Users Guide

ManualsBrandsDell ManualsAccess PlatformsEMC PowerSwitch N3100 Series
1011101210131014101510161017101810191020
Table Of Contents
Link Aggregation 1013
• Each member of the LAG must be running at the same speed and must be
in full duplex mode.
• The port cannot be a mirrored port
The following are the interface restrictions
• The configured speed of a LAG member cannot be changed.
• An interface can be a member of only one LAG.
Default Link Aggregation Values
The LAGs on the switch are created by default, but no ports are members.
Table 26-1 summarizes the default values for the Link Aggregation.
Table 26-1. Link Aggregation Table Defaults
Parameter Default Value
LACP system priority 1
LACP port priority 1
LACP timeout Long
LAG hash algorithm type Enhanced (7) for N2000, N2100-ON, N3000-
ON, and N3100-ON Series Switches:
Source/Destination MAC, VLAN, EtherType,
source MODID/port (5) for N1100-ON and
N1500 Series switches.