Users Guide

Layer 3 Routing Commands 1643
• candidate—Show the IPv6 PIM candidate bootstrap router information.
• elected—Show the IPv6 elected PIM bootstrap router information.
Default Configuration
There is no default configuration for this command.
Command Mode
User Exec, Privileged Exec modes, Global Configuration mode and all
Configuration submodes
User Guidelines
Field descriptions are shown in the following table.
Example
console(config)#show ipv6 pim bsr-router candidate
BSR Address.................................... 2001:0db8:0:badc::1
BSR Priority................................. 0
BSR Hash Mask Length......................... 64
C-BSR Advertisement Interval (secs).......... 60
Next Bootstrap message (hh:mm:ss)............ 00:00:32
If no configured/elected BSR’s exist on the router, the following message is
displayed:
No BSR’s exist/learned on this router.
Field Description
BSR Address Address of the BSR
BSR Priority Configured BSR priority
BSR Hash Mask
Length
Configured hash mask length
Next Bootstrap
Message
Remaining time until a BSR message is sent
Next Candidate RP
Advertisement
Time remaining until the next RP advertisement is sent.