Users Guide
Getting Started for Device Conguration Deployment
Before you can deploy a device conguration to target devices, you must:
1. Congure the deployment le share on the server running OpenManage Essentials.
2. Add target devices to the Repurpose and Bare Metal Devices group.
Related link
Overview of Bare Metal Deployment
Overview of Stateless Deployment
Conguring the Deployment File Share
Adding Devices to the Repurpose and Bare Metal Devices Group
Overview of Bare Metal Deployment
The steps that you must perform to deploy a device conguration template on target devices are as follows:
1. Create a device conguration template — Use the Create Template task in the Common Tasks pane to create a device
conguration template. You can choose to create the template from either a conguration le or a reference device.
2. Edit the device conguration template — Select the template from the Templates pane, and edit the desired conguration
attributes displayed in the right pane.
3. Deploy the device conguration template on target devices — Use the Deploy Template task in the Common Tasks pane to
select the template, target devices, edit device-specic attributes, and then deploy the conguration attributes. You can also
use the Setup Auto Deployment task to deploy a device conguration template on devices that you will be discovering later.
NOTE: If the hardware of the device from which the device conguration template was created and the hardware of the
deployment targets are identical, it enhances the possibility of the attributes being deployed successfully. If the hardware
is not entirely identical, the deployment task may not complete successfully. However, the attributes for the matching
components are deployed successfully.
Related link
Getting Started for Device Conguration Deployment
Creating a Device Deployment Template
Editing a Device Deployment Template
Deploying a Device Deployment Template—Bare Metal Deployment
Viewing the Deployment Portal
To view the deployment portal, click Deployment → Deployment Portal.
Conguring the Deployment File Share
Before creating or deploying a conguration template from a device, you must congure the deployment le share on the server
running OpenManage Essentials. The deployment le share temporarily stores the conguration le that is used to retrieve and apply
the conguration settings on a target server or chassis.
To congure the deployment le share:
1. Perform one of the following:
• Click Settings → Deployment Settings.
• Click Deployment. In the Common Tasks pane, click File Share Settings.
• Click Deployment → Getting Started for Deployment → Congure Deployment File Share.
• Click Manage → Conguration. In the Common Tasks pane, click File Share Settings.
121