Compatibility Matrix

Introduction

Dell EMC OpenManage Enterprise is a systems management and monitoring application that provides a comprehensive view of the Dell

EMC servers, chassis, storage, and network switches on the enterprise network. With OpenManage Enterprise, a web-based and

one‑to‑many systems management application, you can:

• Discover and manage devices in a data center environment.

• Create and manage OpenManage Enterprise users.

• Group and manage devices.

• Monitor the health of your devices.

• Manage device firmware versions, and perform system updates and remote tasks.

• Create and deploy device configuration templates.

• Create and assign identity pools, and perform stateless deployment on target devices.

• Create configuration compliance baselines and remediate devices.

• View and manage system alerts and alert policies.

• View hardware inventory and compliance reports.

• Monitor and report about warranty and licenses.

Topics:

• Supported agents and interfaces

• Supported devices

• Supported hypervisors

• Supported browsers

• Minimum recommended hardware

• Contacting Dell

Supported agents and interfaces

NOTE:

For more information about the agents and interfaces that are listed, see their respective product

documentation available on the support site.

Table 1. Agents and interfaces supported by OpenManage Enterprise version 3.4

Dell EMC system agents and interfaces Supported version

Dell EMC OpenManage Server Administrator—for monitoring

device alerts only

9.0 and later versions

Dell Chassis Management Controller (CMC)

For the PowerEdge M1000e chassis—6.0 and later versions

For the PowerEdge VRTX chassis—3.0 and later versions

For the PowerEdge FX2 and FX2s sleds—2.0 and later versions

Dell EMC OpenManage Enterprise—Modular For the PowerEdge MX7000 chassis—1.0 and later versions

iDRAC9 All the 14G PowerEdge servers — iDRAC 3.30.30.30 and later

versions, except for the following PowerEdge servers:

• MX840C, MX740C—3.20.20.20

• R6415, R7415, and R7425—iDRAC 3.17.20.17 and later versions

iDRAC7 and iDRAC8 2.40.40.40 and later versions

NOTE: Ensure that Express or Enterprise licenses are

available to perform firmware updates.

iDRAC6

For the monolithic systems—1.98 and later versions

Introduction 3