Users Guide

Table 23. dellemc_configure_idrac_network (continued)
Parameter/aliases Required Default Choices Comments
● LOM1
● LOM2
● LOM3
● LOM4
failover_network No NA
● ALL
● LOM1
● LOM2
● LOM3
● LOM4
● T_None
Failover Network Interface Controller types
for iDRAC
auto_detect No NA
● Enabled
● Disabled
Auto detect Network Interface Controller
types for iDRAC
auto_negotiation No NA
● Enabled
● Disabled
Auto negotiation of Network Interface
Controller for iDRAC
network_speed No NA
● T_10
● T_100
● T_1000
Network speed for Network Interface
Controller types for iDRAC
duplex_mode No NA
● Full
● Half
Transmission of data Network Interface
Controller types for iDRAC
nic_mtu No None NA NIC Maximum Transmission Unit
ip_address No NA NA IP Address needs to be defined
enable_dhcp No NA NA
Whether to Enable or Disable DHCP
Protocol for iDRAC
dns_from_dhcp No NA
● Enabled
● Disabled
Specifying Domain Name System from
Dynamic Host Configuration Protocol
enable_ipv4 No NA
● Enabled
● Disabled
Whether to Enable or Disable IPv4
configuration
static_dns_1 No NA NA
Specify Domain Name System
Configuration
static_dns_2 No NA NA
Specify Domain Name System
Configuration
static_gateway No None NA
Interfacing the network with another
protocol
static_net_mask No None NA
Determine whether IP address belongs to
host
Table 24. Return Values
Name Description Returned Type Sample
iDRAC network
Configures the iDRAC
network attributes
Success String
https://github.com/dell/Dell-EMC-Ansible-
Modules-for-iDRAC/blob/master/samples/
dellemc_configure_idrac_network.md
Example
-name: Configure the iDRAC network attributes
dellemc_configure_idrac_network:
idrac_ip: "xx.xx.xx.xx"
idrac_user: "xxxx"
idrac_password: "xxxxxxxx"
30
Modules for iDRAC