API Guide

Table 14. Command Description
Command Description
OS10# show image
status
View the status of the
current software
install.
vii. Change the next boot partition to the standby
partition in EXEC mode. Use the active parameter
to set the next boot partition from standby to
active.
Table 15. Command Description
Command Description
OS10# boot
system standby
Change the next boot
partition to standby.
viii. (Optional) Check if the next boot partition has
changed to standby in the EXEC mode.
Table 16. Command Description
Command Description
OS10# show boot
detail
Check whether the
next boot partition has
changed.
ix. Reload the new software image in the EXEC
mode.
Table 17. Command Description
Command Description
OS10# reload Reload the new
software.
x. After the installation is complete, enter the show
version command to check if the latest version
of the software is running in the system. The
example below shows that the 10.5.0.5 software
is installed and running on the system.
Table 18. Command Description
Command Description
OS10# show
version
MX9116N-A2#
show version
Dell EMC
Networking
OS10
Enterprise
Copyright (c)
1999-2020 by
Dell Inc. All
Rights
Reserved.
OS Version:
10.5.0.5
Build
Version:
10.5.0.5.661
Build Time:
2020-02-15T00:
Display the software
version on the system.
56 Getting Started with Dell EMC SmartFabric OS10