Owner`s manual

Installing The Smart Card Reader

1. Place the smart card reader to its original position on the computer.

2. Replace and tighten the screws to secure the smart card reader to the

computer.

3. Connect the smart card reader cable to the system board.

4. Replace and tighten the screws to secure the palmrest assembly to the

computer.

5. Install the

palmrest assembly

6. Install the

keyboard

7. Install the

keyboard trim

8. Install the

hard drive

9. Install the

ExpressCard

10. Install the

base cover

11. Install the

optical drive

12. Install the

Secure Digital (SD) card

13. Install the

battery

14. Follow the procedures in

After Working Inside Your Computer