Users Guide

36 │ Operating your monitor
Before the DDC/CI function is disabled, the following message is displayed.
Dell 2X Monitor
The function of adjusting display setting using PC application
will be disabled.
Do you wish to disable DDC/CI function?
E2X21HN
No
Yes
The following Power Warning Message box applies to Brightness functions for the first time
when you adjust the Brightness level above the default level.
Dell 2X Monitor
Adjusting to this value will increase power consumption above the
default level. Do you want to continue?
E2X21HN
No
Yes
When the monitor enters Standby mode, the following message appears.
Dell 2X Monitor
Going into Standby mode...
E2X21HN
If VGA or HDMI cable is not connected, a floating dialog box appears. The monitor will enter
Standby mode after 4 minutes if left at this state.
Dell 2X Monitor
No HDMI Cable
www.dell.com/E2X21HN
The display will go into Standby mode in 4 minutes.
E2X21HN
?
See Troubleshooting for more information.