User Guide

About Your Monitor | 15
Power Management Modes
If you have VESA's DPM™ compliance display card or software installed in your PC, the
monitor can automatically reduce its power consumption when not in use. This is
referred to as Power Save Mode*. If the computer detects input from the keyboard,
mouse, or other input devices, the monitor automatically resumes functioning. The
following table shows the power consumption and signaling of this automatic power
saving feature.
VESA Modes Horizontal
Sync
Vertical
Sync
Video Power
Indicator
Power
Consumption
Normal
operation
Active Active Active White 25 W (maximum)**
22 W (typical)
Active-off
mode
Inactive Inactive Blanked White (blinking) Less than 0.3 W
Switch off - - - Off Less than 0.3 W
Energy Star Power Consumption
P
on
16.4 W
E
TEC
51.0 kWh
The OSD functions only in the normal operation mode. When any button is pressed in
the Active-off mode, the following message will be displayed:
NOTE: The message may be slightly different according to the connected input
signal.
NOTE: This monitor is ENERGY STAR
®
-compliant.
NO
TE:
P
on
: Power consumption of on mode as defined in Energy Star 7.0 version.
E
TEC
: Total energy consumption in kWh as defined in Energy Star 7.0 version.
* Zero power consumption in OFF mode can only be achieved by disconnecting the
main cable from the monitor.
** Maximum power consumption with max luminance.