Owners Manual

Figure 28. Removing the 3.5-inch HDD
1 Install the 3.5-inch HDD into a tray.
2 Complete the procedure listed in After working inside your system.
Installing 3.5-inch hard drive into a tray
1 Follow the safety guidelines listed in the Safety instructions section.
2 Complete the procedure listed in Before working inside your system.
1 Align the HDD in the HDD carrier. Make sure the screw holes on the HDD are aligned with the screw holes on the HDD carrier.
2 Place the HDD in the HDD carrier and secure with the provided screws.
Installing and removing server components
73