Owners Manual
Figure 151. Removing a CMA in a hard drive tray
Table 78. Assembly material
Description Quantity Torque (lbs/inch)
#6-32 screw 1 6 ± 0.2
6 Connect the signal cable to either the PCIe raid or Mini PERC slots. This step is dependent on the specic conguration.
7 Connect the power cable to the NPDB.
1 Install the 3.5-inch or 2.5-inch hot swappable HDD.
2 Complete the procedure listed in After working inside your system.
Installing and removing server components
197