Owners Manual
Figure 147. Installing the SAS expander board
Table 77. Assembly material
Description Quantity Torque (lbs/inch)
#6-32 screw 1 6 ± 0.2
1 Complete the procedure listed in After working inside your system.
Cable management arm
Removing CMA in the hard drive tray
1 Ensure that you read the Safety instructions.
2 Complete the procedure listed in Before working inside your system.
3 Remove the 3.5-inch or 2.5-inch hot swappable HDDs.
1 Locate the power cable connecting the CMA to the NPDB. Disconnect it from the NPDB.
2 Locate the signal cables connected to the PCIe raid or Mini PERC slot, see your specic conguration for the connection type.
Disconnect the signal cable from the slot.
Installing and removing server components
193