CLI Guide

Result

WARNING: IO to the box will be stopped during enclosure addition.

Do you want to continue (yes/no) [n]? y

Enclosure: "CTKHVW1" added successfully.

system --storage [--set_usage_alert <70% - 90%>]

Description

Used to specify at what storage utilization percentage an alert should be sent.

Syntax

system --storage --set_usage_alert 90

Result

System storage usage alert has been set at 90%.

system --storage [--blink] [--type <internal | external>] [--service_tag <service tag>] [--

disk <slot num>]

Description

Turns on an LED that is used in locating a specific physical disk or data storage expansion shelf (using the system --

storage

command) in the DR Series system. Select from the following DR Series system CLI command options:

• --blink: turns on LED on the physical disk or expansion shelf to identify it.

• --type <internal | external>: identifies storage as an internal physical disk or external expansion shelf.

• --service_tag <service tag>: identifies physical disk or expansion shelf by its unique service tag.

• --disk <slot num>: identifies the disk slot number (if no disk slot is defined, it globally affects all disks).

NOTE: There is a counterpart to this command, in which you can turn off the LED that aids in locating the physical

disk or expansion shelf. For more information, see system --storage [--unblink] [--type <internal | external>] [--

service_tag>] [--disk <slot num>].

NOTE: The above options are only available on a Physical DR.

Syntax

system --storage --blink --type external --service_tag HCM0PT3

Result

Turned on blinking for all disks in enclosure "HCM0PT3".

system --storage [--unblink] [--type <internal | external>] [--service_tag <service tag>] [--

disk <slot num>

Description

Turns off an LED that is used in locating a specific physical disk or data storage expansion shelf (using the system --

storage command) in the DR Series system. Select from the following DR Series system CLI command options:

• --unblink: turns off LED on the physical disk or expansion shelf.

• --type <internal | external>: identifies storage as an internal physical disk or external expansion shelf.

• --service_tag <service tag>: identifies physical disk or expansion shelf by its unique service tag.

• --disk <slot num>: identifies the disk slot number (if no disk slot is defined, it globally affects all disks).