Vostro 2520 Laptop Manual
Table Of Contents
- Dell Vostro 2520 Owner's Manual
- Working on Your Computer
- Removing and Installing Components
- Recommended Tools
- Removing the Battery
- Installing the Battery
- Removing the Secure Digital (SD) Card
- Installing the Secure Digital (SD) Card
- Removing the Hinge Cover
- Installing the Hinge Cover
- Removing the Keyboard
- Installing the Keyboard
- Removing the Optical Drive
- Installing the Optical Drive
- Removing the Memory Module
- Installing the Memory Module
- Removing the Palmrest
- Installing the Palmrest
- Removing the Power-Button Board
- Installing the Power-Button Board
- Removing the Hard Drive
- Installing the Hard Drive
- Removing the Wireless Local Area Network (WLAN) Card
- Installing the Wireless Local Area Network (WLAN) Card
- Removing the Coin-Cell Battery
- Installing the Coin-Cell Battery
- Removing the USB Board
- Installing the USB Board
- Removing the Microphone
- Installing the Microphone
- Removing the Heat-Sink Fan Assembly
- Installing the Heat-Sink Fan Assembly
- Removing the Processor
- Installing the Processor
- Removing the System Board
- Installing the System Board
- Removing the Speakers
- Installing the Speakers
- Removing the Display Assembly
- Installing the Display Assembly
- Removing the Power-Connector Port and Bracket
- Installing the Power-Connector Port and Bracket
- Removing the Display Bezel
- Installing the Display Bezel
- Removing the Camera
- Installing the Camera
- Removing the Display Panel
- Installing the Display Panel
- Removing the Low-Voltage Differential Signaling (LVDS) Cable
- Installing the Low-Voltage Differential Signaling (LVDS) Cable
- System Setup
- Diagnostics
- Technical Specifications
- Contacting Dell
6. Install the keyboard.
7. Install the battery.
8. Follow the procedures in
After Working Inside Your Computer
.
Removing the Power-Button Board
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove:
a) battery
b) keyboard
c) palmrest
3. Peel the power-button board cable from the adhesive affixing it to the palmrest.
4. Flip the palmrest and remove the screw that secures the power-button board to the palmrest.
5. Lift up the power-button board and release the power-button board cable through the opening.
17