User Manual

Security

• Enable — User may enter OROM configuration screens via

the hotkey.

• One-Time Enable — User may enter OROM configuration

screens via the hotkeys on next boot only. After next boot,

the setting will revert to disabled.

• Disable — User may not enter OROM configuration

screens via the hotkey.

This option is set to Enable by default.

Admin Setup Lockout Allows you to enable or disable the option to enter Setup when

an Admin password is set. This option is not set by default.

Performance

Multi Core Support This field specifies whether the process will have one or all

cores enabled. The performance of some applications will

improve with the additional cores. This option is enabled by

default.

Intel® SpeedStep™ Allows you to enable or disable the Intel SpeedStep mode of

the processor. This option is enabled by default.

C States Control Allows you to enable or disable the additional processor sleep

states. This option is enabled by default.

Intel® TurboBoost™ Allows you to enable or disable Inel TurboBoost mode of the

processor.

•

Disabled — Does not allow the TurboBoost driver to

increase the performance state of the processor above the

standard performance.

• Enabled — Allows the Intel Turbo driver to increase the

performance of the CPU or graphics processor.

This option is enabled by default.

Hyper-Thread Control Allows you to enable or disable the Hyper-Threading

Technology. This option is enabled by default.

Power Management

AC Recovery Determines how the system responds when AC power is re-

applied after a power loss. You can set the AC Recovery to:

•

Power Off (default)