Manualshelf

Command Line Interface Guide

ManualsBrandsDell ManualsSoftwareDell Dell OpenManage Server Administrator Version 7.3
21222324252627282930
Parameter Description
HT Assist Displays the status of the probe filter chipset option.
Internal SD Card Displays whether the internal SD card is enabled or disabled.
Bezel Displays whether the bezel removal intrusion check during system reboot is enabled
or disabled.
Console Redirection Displays whether the BIOS screen is redirected over a particular serial port or if it is
turned off.
Diskette Displays whether the diskette is disabled, auto enabled, or read-only.
Demand Based Power
Management (DBS)
Displays whether DBS is enabled or disabled on the system.
Embedded Hypervisor Displays whether the embedded hypervisor is enabled or disabled.
IDE Displays whether the drive is enabled or disabled.
IDE Primary Drive 0 Displays whether the device is automatically detected and enabled or if the device is
disabled.
IDE Primary Drive 1 Displays whether the device is automatically detected and enabled or if the device is
disabled.
Intrusion Displays whether the intrusion check is enabled or disabled during system boot.
Mouse Displays whether the mouse is enabled or disabled.
Optical Drive Controller Displays whether the optical drive controller is enabled or disabled.
Parallel port address Displays whether the address is located on LPT1, LPT2, and LPT3, or if it is disabled.
Parallel port mode Displays the setting associated with the parallel port.
Primary SCSI Displays whether the device is on or off.
RAID on motherboard Displays whether RAID-on-motherboard is detected as a RAID device, a SCSI device,
or if the device is disabled during system boot.
RAID Channel A Displays whether RAID-on-motherboard Channel A is detected as a RAID device or a
SCSI device.
RAID Channel B Displays whether RAID-on-motherboard Channel B is detected as a RAID device or a
SCSI device.
Serial Port 1 Displays whether serial port 1 is mapped to a COM port, COM port 1, COM port 3,
COM1 BMC, BMC Serial, BMC NIC, BMC RAC, or is disabled.
Serial Port 2 Displays whether serial port 2 is mapped to a COM port, COM port 2, COM port 4, or is
disabled.
Speaker Displays whether the speaker is on or off.
USB or USBB Displays whether the USB port is enabled or disabled.
Secondary SCSI Displays whether the device is enabled or disabled.
Serial Communications Displays whether COM port 1 and COM port 2 are off or on with or without console
redirection.
28