Command Line Interface Guide

Required Command
Levels (1, 2, 3)
Optional name=value pairs
action=globalrescan
action=setprotectionpolicies type=ghs or dhs
Omconfig Global Enable Smart Thermal Shutdown
By default, the operating system and server shut down when the PV220S and PV221S enclosures reach a critical
temperature of 0 or 50 degree Celsius. However, if you have implemented connector redundancy on the PV220S and
PV221S enclosures you can specify that only the enclosure and not the operating system and server are shut down
when the enclosure reaches a critical temperature of 0 or 50 degree Celsius. Specifying that only the enclosure is shut
down during excessive temperatures is known as Smart Thermal Shutdown. For more information about Smart Thermal
Shutdown, see the Dell OpenManage Online Help .
Description Enables smart thermal shutdown.
Syntax
omconfig storage globalinfo action=enablests
Example to Enable thermal shutdown. The omconfig command syntax for enabling thermal shutdown
does not require a controller or enclosure ID.
NOTE: You can use the omreport storage globalinfo command to determine whether
smart thermal shutdown is currently enabled or disabled. The status of smart thermal
shutdown is also displayed by the Server Administrator graphical user interface (GUI).
To locate this status, select the Storage object and the Information/Configuration tab.
Example
omconfig storage globalinfo action=enablests
Omconfig Global Disable Smart Thermal Shutdown
If you have previously enabled smart thermal shutdown using the omconfig command, you can disable smart thermal
shutdown and return the system to its default setting. When smart thermal shutdown is disabled, the operating system
and the server shuts down when the PV220S and PV221S enclosures reach a critical temperature of 0 or 50 degree
Celsius.
Description Disables smart thermal shutdown for all controllers.
Syntax
omconfig storage globalinfo action=disablests
Example to Disable thermal shutdown. The omconfig command syntax for disabling thermal shutdown
does not require a controller or enclosure ID.
NOTE: You can use the omreport storage globalinfo command to determine whether
smart thermal shutdown is currently enabled or disabled. The status of smart thermal
shutdown is also displayed in the GUI of Server Administrator. To locate this status,
select the Storage object and the Information/Configuration tab.
Example
omconfig storage globalinfo action=disablests
Omconfig Global Rescan Controller
Description
Rescans all the controllers on the system. For more information about Global Rescan
Controller, see the Dell OpenManage Online Help .
Syntax
omconfig storage globalinfo action=globalrescan
178