Command Line Interface Guide

NOTE: This command is not supported on SCSI RAID controllers.
Syntax
omconfig storage enclosure action=setalltempprobes
controller=id enclosure=<ENCLOSUREID> minwarn=n maxwarn=n,
where id is the controller ID. The <ENCLOSUREID> variable specifies the enclosure.
In this syntax, n is a user-specified alphanumeric string.
Example to Set the thresholds for all temperature probes residing in enclosure 3 attached to connector
2 on controller 1, to 10 and 40 degree Celsius.
Example for SAS
controllers
omconfig storage enclosure action=setalltempprobes
controller=1 enclosure=2:3 minwarn=10 maxwarn=40
Omconfig Reset All Temperature Probe Thresholds
Table 114. oOmconfig Reset All Temperature Probe Thresholds
Description Resets the minimum and maximum warning temperature thresholds back to their default
value for all temperature probes in the enclosure.
NOTE: This command is not supported on SCSI RAID controllers.
Syntax
omconfig storage enclosure action=resetalltempprobes
controller=id enclosure=<ENCLOSUREID>, where id is the controller ID. The
<ENCLOSUREID> variable specifies the enclosure.
In this syntax, n is a user-specified alphanumeric string.
Example to Reset the thresholds for all temperature probes in enclosure 3 attached to connector 2 on
controller 1.
Example for SAS
controllers
omconfig storage enclosure action= resetalltempprobes
controller=1 enclosure=2:3
Omconfig Blink
Table 115. omconfig Blink
Description Blinks the light-emitting diodes (LEDs) on the enclosure.
Syntax
omconfig storage enclosure action=blink controller=id
enclosure=<ENCLOSUREID>, where id is the controller ID. The <ENCLOSUREID>
variable specifies the enclosure.
Example to Blink the LEDs for enclosure 3 attached to connector 2 on controller 1.
Example for SAS
controllers
omconfig storage enclosure action=blink controller=1
enclosure=2:3
Example for SCSI, SATA,
and ATA controllers
omconfig storage enclosure action=blink controller=1
enclosure=2
Omconfig Battery Commands
The following table displays the omconfig command syntax required to execute battery tasks.
176