Command Line Interface Guide

Required Command Levels (1, 2, 3) Optional name=value pairs Use
NOTE: When the connectors are
connected to the enclosure in
redundant path mode, the Name of the
connector is displayed as Logical
Connector.
Omreport Cachecade Status
The following table describes the syntax for the omreport Cachecade commands
Table 79. Omreport Cachecade Commands
Required Command Levels (1, 2,
3)
Optional name=value pairs Use
omreport storage cachecade Displays property information for all
cachecades on all controllers.
controller=id, where id is the controller
number. For example, controller=0.
Displays all cachecades on the specified
controller.
controller=id cachecade=id, where id is
the controller number and the cachecade
number. For example, controller=0
cachecade=1.
Displays the specified cachecade on the
controller.
Omreport PCIe SSD Status
The following table describes the syntax for the omreport pciessd commands.
Table 80. omreport PCIe SSD Command
Required Command Levels (1, 2, 3)
And name=value pair
Optional name=value pairs Use
omreport storage pciessd
Displays the properties of the PCIe
SSD subsystem.
subsystem=id Displays the properties of the
specified PCIe subsystem.
Omreport Fluid Cache Status
The following table describes the syntax for the omreport fluidcache commands.
Table 81. omreport Fluid Cache Command
Required Command Levels (1, 2, 3) And name=value pair Use
omreport storage fluidcache
Displays fluid cache properties and the associated fluid
cache disks.
Omreport Fluid Cache Pool Status
The following table describes the syntax for the omreport fluidcachepool commands.
136