User's Manual

omconfig: Managing Components Using the Instrumentation Service 107
NOTE: The options ipv4idrac, ipv6idrac, and macidrac are deprecated.
omconfig chassis info/omconfig mainsystem info
Use the omconfig chassis info or omconfig mainsystem info command to
enter an asset tag name and a chassis name for your system. If your system is a
modular one, you can enter asset tag names for modular components as well.
Table 4-6 shows the valid parameters for the command.
In the following example, the asset tag for the main system chassis is being set
to buildsys:
omconfig chassis info index=0 tag=buildsys
or
omconfig mainsystem info index=0 tag=buildsys
config=
remoteaccessmac
NA Sets the remote access MAC address.
config=ipv4idrac Sets IPv4 DRAC information.
config=ipv6idrac Sets IPv6 DRAC information.
config=macidrac NA Sets the DRAC’s MAC address.
config=
ambienttemp
NA Sets the system temperature in centigrade.
security=modify NA Allows you to modify the LCD text.
security=view NA Provides read-only access to the LCD text.
security=disabled NA Provides limited access to the LCD text.
remoteindication
=true
NA LCD flashes when the system detects an
active remote session.
Table 4-6. omconfig chassis info/omconfig mainsystem info
name=value pair Description
index=<n> Number of the chassis whose asset tag or name you are
setting.
tag=<text> Asset tag in the form of alphanumeric text. Letters or
numbers should not exceed 10 characters.
name=<text> Name of the chassis.
Table 4-5. omconfig chassis frontpanel/omconfig mainsystem frontpanel
(continued)
name=value pair 1 name=value pair 2 Description