User's Manual

168 Using the Storage Management Service
Complete Syntax
omconfig storage vdisk action=cancelbginitialize
controller=id vdisk=id
where id is the controller ID and virtual disk ID as reported by the omreport
command. To obtain these values, enter omreport storage controller to
display the controller IDs and then enter omreport storage vdisk controller=
ID to display the IDs for the virtual disks attached to the controller.
Example Syntax
To cancel background initialization on virtual disk 4 on controller 1, enter:
omconfig storage vdisk action=cancelbginitialize
controller=1 vdisk=4
omconfig Restore Dead Segments
Use the following omconfig command syntax to recover data from a RAID-5
virtual disk that has been corrupted. This task attempts to reconstruct data
from a corrupt portion of a physical disk included in a RAID-5 virtual disk.
Complete Syntax
omconfig storage vdisk action=restoresegments
controller=id vdisk=id
where id is the controller ID and virtual disk ID as reported by the omreport
command. To obtain these values, enter omreport storage controller to display
the controller IDs and then enter omreport storage vdisk controller=ID to
display the IDs for the virtual disks attached to the controller.
Example Syntax
To restore segments on virtual disk 4 on controller 1, enter:
omconfig storage vdisk action=restoresegments
controller=1 vdisk=4
omconfig Split Mirror
Use the following omconfig command syntax to separate mirrored data
originally configured as a RAID 1, RAID-1–concatenated, or RAID-10 virtual
disk. Splitting a RAID-1 or RAID-1–concatenated mirror creates two