Web Services Interface Guide

Dell™ Lifecycle Controller 2 Web Services Interface Guide for Windows Version: 2.1.0
125
[INSTANCE ID]: Obtained from the BootSourceSetting Class enumeration, this example uses
the field IPL
source: Reference to the InstanceID attribute from Section 14.3
EnabledState: State of boot source element
Disabled=0, Enabled=1
EXAMPLE:
winrm i ChangeBootSourceState http://schemas.dmtf.org/wbem/wscim/1/cim-
schema/2/root/dcim/DCIM_BootConfigSetting
?InstanceID=[INSTANCE ID]
-u:[USER] -p:[PASSWORD]
-r:https://[IPADDRESS]/wsman -SkipCNcheck -SkipCAcheck
-encoding:utf-8 -a:basic -file:ChangeBootSourceState.xml
The input file ChangeBootSourceState.xml is shown below:
<p:ChangeBootSourceState_INPUT xmlns:p="http://schemas.dmtf.org/wbem/wscim/1/cim-
schema/2/root/dcim/DCIM_BootConfigSetting">
<p:EnabledState>0</p:EnabledState>
<p:source>IPL:Optical.SATAEmbedded.A-1:eb8aeb15796fb85f8e1447f0cfb8a68e</p:source>
</p:ChangeBootSourceState_INPUT>
OUTPUT:
ChangeBootSourceState_OUTPUT
Message = The command was successful
MessageID = BOOT001
ReturnValue = 0
15 NIC/CNA Card Management
This feature provides the ability to get and set the Network Interface (NIC) Card or Converged Network
Adapter (CNA) attributes that are configurable using NIC/CNA Option-ROM or NIC/CNA UEFI HII. The
attributes include functionalities for the following:
 Partition and personality (CNA only)
 iSCSI boot and PXE boot that are part of the NIC/CNA firmware
The ability to configure CNAs has been added to the NIC profile that extends the management
capabilities of the referencing profiles. The NICs/CNAs are modeled as views with collections of
attributes where there is a view for each partition on the controller.
The NIC/CNA Inventory has these classes and views:
1. DCIM_NICEnumeration, (see Section 15.1)
2. DCIM_NICString (see Section 15.2)