User's Manual

64 USC and USC-LCE Operations
To specify user-configured controls, click Ethernet IP Address settings, and
enter appropriate values for the following:
• Ethernet IP Address — Maximum value of 255.255.255.255
• Subnet Mask — Maximum value of 255.255.255.255
• Default Gateway — Maximum value of 255.255.255.255
•Get DNS Servers from DHCP — Yes/No
– If set to Yes , the iDRAC NIC acquires the DNS server information
from the DHCP server, and deactivates the
DNS Server 1 and DNS
Server 2
controls.
– If set to No , the iDRAC NIC does not acquire the DNS Server
information from the DHCP server, and you must manually define the
DNS Server 1 and DNS Server 2 fields.
• DNS Server 1 (Primary DNS Server)— Maximum value of
255.255.255.255
• DNS Server 2 (Secondary DNS Server)— Maximum value of
255.255.255.255
Attribute Description Values
IPv4 iDRAC NIC IPv4 protocol support.
Disabling IPv4 deactivates the controls
Enable or
Disable
RMCP+
Encryption Key
RMCP+ encryption key configuring (no blanks
allowed). The default setting is all zeros (0)
0 to 40
hexadecimal
IP Address
Source
The ability of the iDRAC NIC to acquire an
IPv4 address from the DHCP server.
Disabling IP Address Source deactivates the
Ethernet IP Address, and other user-configured
controls.
Enable or
Disable