User's Manual

Troubleshooting and Frequently Asked Questions 111
Please enter the IPv6
Default Gateway address
Enter the IPv6 default gateway address. 
See IPv6 Configuration .
Please enter a valid IPv6
DNS Server 1 Address
Enter a valid IPv6 DNS Server1 address. 
See IPv6 Configuration .
Please enter a valid IPv6
DNS Server 2 Address
Enter a valid IPv6 DNS Server2 address. 
See IPv6 Configuration .
Please enter a valid iDRAC
Name of up
to 63 characters
Enter a valid iDRAC name that is less than or
equal
to 63 characters.
Please enter a valid Domain
Name of up
to 64 characters
Enter a valid domain name that is less than or
equal
to 64 characters.
Please enter a valid Host
Name of up to 62
characters
Enter a valid host name that is less than or
equal
to 62 characters.
Please enter a value in the
range of 1 to 4094
Enter a VLAN ID between 1 and 4094. See Advanced
LAN Configuration .
Please enter a value in the
range of 0 to 7
Enter a VLAN ID priority value between 0 and 7.
See
Advanced LAN Configuration .
iDRAC communication
failure. Please power down,
unplug the system, wait 5
seconds, apply power and
power
on
Communication with iDRAC has failed. To resolve
this
issue:
1 Turn off the system, and then unplug it.
2 Wai t 5 s ec o nd s.
3 Plug the system back in, and then turn it on.
iDRAC hard failure. Please
power down, unplug the
system, wait 5 seconds,
apply power and power on
Connection with iDRAC has failed. To resolve this
issue:
1 Turn off the system, and then unplug it.
2 Wai t 5 s ec o nd s.
3 Plug the system back in, and then turn it on.
RAID configuration failed USC-LCE failed when creating the RAID
configuration. To
resolve this issue:
1 Reboot the system.
2 Re-enter USC-LCE by pressing the <F10> key.
3 Try again to create the RAID configuration.
Table 5-3. USC-LCE Error Messages and Resolutions (continued)
Error Message Resolution