User's Manual

86 USC and USC-LCE Operations

Enter the

Encryption Key Identifier

that will be associated with the

entered passphrase. The Encryption Key Identifier is a passphrase hint;

you must enter the passphrase when USC-LCE prompts with this hint.

In the New Passphrase text box, enter a passphrase.

NOTE: The controller uses the passphrase to encrypt the disk data. A valid

passphrase contains 8 to 32 characters. It must include a combination of

uppercase and lowercase letters, numbers, symbols, and without spaces.

In the

Confirm Passphrase

text box, re-enter the passphrase, and click

Finish

Rekey Controller with a New Local Key

To rekey the controller with a new local key:

In the left pane, click

Hardware Configuration

In the right pane, click

Configuration Wizards

and click

Key Encryption

Select the controller to which the local key is applied and click

In the

Existing Passphrase

text box, enter the existing passphrase

associated with the displayed Encryption Key Identifier.

In the

New Encryption Key Identifier

text box, enter the new identifier.

The Encryption Key Identifier is a passphrase hint; you must enter the

passphrase when USC-LCE prompts with this hint.

In the

New Passphrase

text box, enter the passphrase that will be

associated with the new encryption key identifier

Remove Encryption and Delete Data

To remove the encryption and delete the data on the virtual disks:

In the left pane, click

Hardware Configuration

In the right pane, click

Configuration Wizards

and click

Key Encryption

Select the controller on which you must remove the key that was applied

and click