Administrator Guide

Dell ControlPoint Connection Manager 55
NOTE: The Connect Prior to Logon feature is available in this software
release only on the Windows XP operating system. If you are running DCP
Connection Manager on the Windows Vista operating system, this setting will
be disabled (grayed-out).
– Select Use VPN Connection to automatically start the VPN configured
with this
network connection .
–
Exclude from VPN enforcement switches the Enforce VPN function
off for this Location Profile. The
Enforce VPN setting is located on the
Program Settings screen.
– Select
Specify Mandatory AP to enforce Wi-Fi network access to a
specific AP.
5 Select EAP-FAST-TLS from the Authentication drop-down list.
6 Click Settings to continue to the next screen (see Figure 1-24).
7 From the Connection tab, check the Use anonymous outer identity box to
prevent clear text username and password transmission.
8 If using Automatic PAC Provisioning, check the Validate server certificate
box. Select the certificate authority associated with the security certificate
your PC will access.
If you are
not using Automatic PAC Provisioning, check the Available
Manual PAC
radio button and click the Add button to manually install a
PAC file.
9 Check the Enable Fast Reconnect box to allow limited re-authentication
when roaming between Wi-Fi access points.
NOTE: This setting is available only with Cisco Wi-Fi access points
configured with Cisco Wireless Domain Services (WDS).
10 Click the User Credentials tab to continue (see Figure 1-22).
11 If using a certificate, click the Use the following Certificate radio button
and select the certificate installed on your laptop from this list.
12 Click OK to return to the Advanced Wi-Fi screen.
13 Click OK to finish configuring advanced Wi-Fi settings and return to the
Profile Wizard Settings screen.
14 Click Next to continue the Profile Wizard , or click Finish to reach the
Profile Wizard Summary page.
A5_bk0.book Page 55 Wednesday, January 28, 2009 12:42 PM