Reference Guide

Table Of Contents
Table 7. DesktopMonitor (continued)
Property Description
Each entry of this array is related to the entry in
OtherIdentifyingInfo that is located at the same index.
InputAnalog
Input is an analog video signal interface.
InputDigital
Input is a digital video signal interface.
InputDisplayPort
DisplayPort is supported.
InputDVI
DVI is supported.
InputHDMI
HDMI is supported.
InputSource
An enumerated value identifying the current input source.
Writing a new value into this property changes the device's
input source to the specified value, if the value is supported
as specified in InputSourceCapabilities. If the requested value
is not in InputSourceCapabilities, then the current value of
InputSource is unchanged.
Possible values are:
0 = Unknown
2 = Analog Video (R/G/B) #1
3 = Analog Video (R/G/B) #2
4 = Digital Video (TMDS) #1
5 = Digital Video (TMDS) #2
6 = Composite Video #1
7 = Composite Video #2
8 = S-video #1
9 = S-video #2
1011 = Tuner - Analog #1
12 = Tuner - Analog #2
13 = Tuner - Digital #1
14 = Tuner - Digital #2
15 = Component Video #1
16 = Component Video #2
17 = Component Video #3
18 = Digital Video (DisplayPort)
#1 .. = Digital Video (DisplayPort)
#2 32768..65535 = DMTF Reserved
InputSourceCapabilities
This property lists the allowed values for InputSource.
Possible values are:
2 = Analog Video (R/G/B) #1
3 = Analog Video (R/G/B) #2
4 = Digital Video (TMDS) #1
5 = Digital Video (TMDS) #2
6 = Composite Video #1
7 = Composite Video #2
8 = S-video #1
9 = S-video #2
1011 = Tuner - Analog #1
12 = Tuner - Analog #2
13 = Tuner - Digital #1
14 = Tuner - Digital #2
Dell Command | Monitor 10.4 classes and properties 33