Reference Guide

Table 30. Processor (continued)
Property Description
● 32768..65535 = Vendor Reserved
By default, the element is Enabled (value = 2).
EnabledState
An integer enumeration that indicates the enabled and disabled states of an element.
It can also indicate the transitions between these requested states.
Possible values are:
● 0 = Unknown
● 1 = Other
● 2 = Enabled—Indicates that the element is or could be executing commands, will
process any queued commands, and queues new requests.
● 3 = Disabled—Indicates that the element will not execute commands and will
drop any new requests.
● 4 = Shutting Down—Indicates that the element is in the process of going to a
Disabled state.
● 5 = Not Applicable—Indicates the element does not support being enabled or
disabled.
● 6 = Enabled but Offline—Indicates that the element may be completing
commands, and will drop any new requests.
● 7 = In Test—Indicates that the element is in a test state.
● 8 = Deferred—Indicates that the element may be completing commands, but will
queue any new requests.
● 9 = Quiesce—Indicates that the element is enabled but in a restricted mode.
● 10 = Starting—Indicates that the element is in the process of going to an
Enabled state. New requests are queued.
● 11..32767 = DMTF Reserved
● 32768..65535 = Vendor Reserved
For example, shutting down (value = 4) and starting (value = 10) are transient states
between enabled and disabled.
ExternalBusClockSpeed
The speed (in MHz) of the external bus interface (also known as the front side bus).
Family
The Processor family type.
Possible values are:
● 1 = Other
● 2 = Unknown
● 3 = 8086
● 4 = 80286
● 5 = 80386
● 6 = 80486
● 7 = 8087
●
8 = 80287
● 9 = 80387
● 10 = 80487
● 11 = Pentium(R) brand
● 12 = Pentium(R) Pro
● 13 = Pentium(R) II
● 14 = Pentium(R) processor with MMX(TM) technology
● 15 = Celeron(TM)
● 16 = Pentium(R) II Xeon(TM)
● 17 = Pentium(R) III
● 18 = M1 Family
● 19 = M2 Family
● 20 = Intel(R) Celeron(R) M processor
114
Dell Command | Monitor 10.4 classes and properties