Reference Guide

Sample file formats for Dell Command |
Configure 4.3
This appendix lists the sample Dell Command | Configure utility.ini file.
Topics:
• Sample Dell Command | Configure utility.ini file format
Sample Dell Command | Configure utility.ini file
format
[cctk]
SysName=Latitude xxxx
SysId= xxxx
BiosVer=1.8.1
;do not edit information above this line
AcPwrRcvry=Off
AdminSetupLockout=Disabled
AdvBatteryChargeCfg=Disabled
Advsm=TEMPERATURE_1:NA
Advsm=TEMPERATURE_2:NA
Advsm=TEMPERATURE_3:NA
Advsm=TEMPERATURE_4:NA
Advsm=CD_1:0
AllowBiosDowngrade=Disabled
AlwaysAllowDellDocks=Enabled
Asset=Dell_123
AttemptLegacyBoot=Disabled
AutoOn=Disabled
AutoOnHr=0
AutoOnMn=0
BiosAutoRcvr=Disabled
BiosIntegrityCheck=Disabled
BiosLogClear=Keep
BiosRcvrFrmHdd=Enabled
BlockSleep=Disabled
BluetoothDevice=Enabled
BootOrder=uefitype,+hdd.1,+hdd.2
;Here '+' indicates Enabled device, '-' indicates Disabled device.You can use
DeviceNumber also to set the boot order. Example: BootOrder=+2,-1,+3
BrightnessAc=10
BrightnessBattery=5
CStatesCtrl=Enabled
Camera=Enabled
CapsuleFirmwareUpdate=Enabled
CpuXdSupport=Enabled
DisOsdBtn=Disabled
EmbNic1=EnabledPxe
EmbSataRaid=Ahci
EnergyStarLogo=Disabled
ExtPostTime=0s
ExternalHotKey=Enabled
FanCtrlOvrd=Disabled
Fastboot=Thorough
;FirstPowerOnDate=20170731
FnLock=Enabled
FnLockMode=DisableStandard
ForcePxeOnNextBoot=Enabled
4
146 Sample file formats for Dell Command | Configure 4.3