Users Guide

Messages and Codes 159
103 The -x (--hex) option can only be used with -b
or -r.
104 Input file '%s' not found.
105 Input file '%s' cannot be read.
106 Invalid argument for option '%s'.
107 Function table lookup error.
108 The machine ID was not found in the file '%s'.
109 The system memory information is not available.
110 Mode can only be used with the --pci option.
111 The device name or index must be present in the
boot order.
112 The output file '%s' could not be opened. Please
make sure. The path exists and the media is not
write protected.
113 Could not write to output file, disk may be full.
114 The current password must be supplied with
a new password using --valsyspwd.
115 The current password must be supplied with
a new password using --valsetuppwd.
116 The current password can only be supplied when
setting a new password.
117 Actions are not allowed for this filter. Only alerts
are allowed.
118 There was an error getting the option '%s'.
119 The option '%s' is not available or cannot be
configured through software.
120 There was an error setting the option '%s'.
121 The -n (--namefile) option can only be used
with --pci.
Table B-1. CCTK Error Codes and Messages
(continued)
Error
Code
Message