Users Guide

Messages and Codes 133
143 The old password supplied is incorrect. The new
password will not be set. Please try again.
144 Cannot stat /etc/omreg.cfg file. Please ensure
/etc/omreg.cfg file is present and is valid for
your environment. You can copy this file from
the DTK iso.
145 Getting nic selection settings failed.
146 HAPI Driver Load Error.
147 Filter action power reduction is only supported for
the system power warn/fail filters.
148 TPM Clear settings requires setup password.
149 There is currently no TPM Clear request pending.
150 Password is not required for retrieving the
TPM options.
151 Setup password is required for setting the
TPM options.
152 Invalid Password override.
153 Invalid TPM set option.
154 There was an error setting the TPM option.
155 There is no setup password installed on this system.
156 The setup password supplied is incorrect.
Please try again.
157 Profile should be custom for setting cpupowermode,
memorypowermode and fanmode.
158 There was an error setting the Power Option.
159 The power cap value entered is out of range.
Please try again.
160 The power cap value entered must be between 0 to 100
if unit is percent.
Table B-1. CCTK Error Codes and Messages
(continued)
Error
Code
Message