CLI Guide

cfgNicVLanPriority (Read or Write)
Description
Species the VLAN Priority for the network VLAN conguration. This property is only valid if cfgNicVLanEnable
is set to 1 (enabled).
Legal Values
0–7
Default
0
Example
racadm config -g cfgLanNetworking -o
cfgNicVLanPriority 7
cfgDNSDomainName (Read or Write)
Description
In the DNS domain name, parameter is only valid if cfgDNSDomainNameFromDHCP is set to 0(FALSE).
Legal Values
A string of up to 254 ASCII characters. At least one of the characters must be alphabetic. Characters are restricted
to alphanumeric, '-', and '.'.
NOTE: Microsoft Active Directory only supports Fully Qualied Domain Names (FQDN) of 64 bytes or
fewer.
Default
<blank>
cfgDNSDomainNameFromDHCP (Read or Write)
Description
Species that CMC DNS domain name must be assigned from the network DHCP server.
Legal Values
• 1 — True
• 0 — False
Default
0
This property is used only if cfgNicUseDhcp is set to 1(true), or if both cfgIPv6Enable and cfgIPv6AutoConfig are set to
1(true).
The CMC can obtain its DNS domain name from either a DHCP or DHCPv6 server, if all of the following properties are set to 1 (true):
• cfgNicIPv4Enable
• cfgNicUseDhcp
• cfgIPv6Enable
• cfgIPv6AutoConfig
• cfgDNSDomainNameFromDHCP
• cfgDNSDomainName (Read or Write)
The network administrator must make sure that these DHCP servers are congured to provide the same DNS domain name to the CMC,
otherwise the domain name becomes unpredictable.
90
CMC Property Database Group and Object Descriptions