User's Manual

Using the iKVM Module 347
3 Select Energy if your monitor is ENERGY STAR compliant; otherwise
select
Screen .
CAUTION: Monitor damage may result from the use of Energy mode with
monitors not compliant with Energy Star.
4 Optional: To activate the screen saver test, click Test . The Screen Saver
Test
dialog box displays. Click OK to start the test.
The test takes 10 seconds. When it concludes, you are returned to the
Security dialog box.
NOTE: Enabling screen saver mode disconnects the user from a server;
no server is selected. The status flag displays Free.
Exiting Screen Saver Mode
To exit screen saver mode and return to the Main dialog box, press any key
or move your mouse.
To turn off the screen saver:
1
In the Security dialog box, clear the Enable Screen Saver box.
2 Click OK .
To immediately turn on the screen saver, press <Print Screen>,
then press <Pause>.
Clearing a Lost or Forgotten Password
When the iKVM password is lost or forgotten, you can reset it to the
iKVM factory default, and then change the password. You can reset
the password using either the CMC Web interface or RACADM.
To reset a lost or forgotten iKVM password using the CMC Web interface:
1
Log in to the CMC Web interface.
2 Select iKVM from the Chassis submenu.
3 Click the Setup tab. The iKVM Configuration page displays.
4 Click Restore Default Values .
You can then change the password from the default using OSCAR.
See "Setting or Changing the Password."