User's Manual

Using FlexAddress 229
SD card in the active
CMC module that is
bound to the same
service tag.
$racadm featurecard -s The feature card
inserted is valid
and contains the
following
feature(s)
FlexAddress: The
feature card is
bound to this
chassis
SD card in the active
CMC module that is
not bound to any
service tag.
$racadm featurecard -s The feature card
inserted is valid
and contains the
following
feature(s)
FlexAddress: The
feature card is not
bound to any
chassis
FlexAddress feature
not active on the
chassis for any
reason (No SD card
inserted/ corrupt SD
card/ after feature
deactivated /SD card
bound to a different
chassis)
$racadm setflexaddr [-f
<fabricName>
<slotState>] OR
$racadm setflexaddr [-i
<slot#> <slotState>]
ERROR: Flexaddress
feature is not
active on the
chassis
Guest user attempts
to set FlexAddress
on slots/fabrics
$racadm setflexaddr [-f
<fabricName>
<slotState>]
$racadm setflexaddr [-i
<slot#> <slotState>]
ERROR: Insufficient
user privileges to
perform operation
Table 6-2. FlexAddress Commands and Output
(continued)
Situation Command Output