User's Manual

228 Using FlexAddress

I have the SD card properly installed and all the firmware/software updates

installed. I see that FlexAddress is active, but I can’t see anything on the

server deployment screen to deploy it? What is wrong?

This is a browser caching issue; shut down the browser and relaunch.

What happens to FlexAddress if I need to reset my chassis configuration

using the RACADM command,

racresetcfg

The FlexAddress feature is still be activated and ready to use. All fabrics

and slots is selected as default.

NOTE: It is highly recommended that you power down your chassis before

issuing the RACADM command

racresetcfg.

Command Messages

The following table lists the RACADM commands and output for common

FlexAddress situations.

Table 6-2. FlexAddress Commands and Output

Situation Command Output

SD card in the active

CMC module is

bound to another

service tag.

$racadm featurecard -s The feature card

inserted is valid

and contains the

following

feature(s)

FlexAddress: The

feature card is

bound to another

chassis, svctag =

J310TF1 SD card SN

=0188BFFE03A