User's Manual

Using the CMC Web Interface 181
To configure CMC services:
1
Log in to the CMC Web interface.
2 Click the Network tab.
3 Click the Services subtab. The Services page appears.
4 Configure the following services as required:
• CMC serial console (Table 5-50)
•Web server (Table5-51)
•SSH (Table5-52)
• Telnet (Table 5-53)
• Remote RACADM (Table 5-54)
• SNMP (Table 5-55)
• Remote Syslog (Table 5-56)
5 Click Apply , and then update all default time outs and maximum time out
limits
Table 5-50. CMC Serial Console Settings
Setting Description
Enabled Enables Telnet console interface on CMC.
Default: Unchecked (disabled)
Redirect Enabled Enables the serial/text console redirection to the server
through your serial/Telnet/SSH client from CMC.
The CMC connects to iDRAC that internally connects
to the server COM2 port.
Configuration options: Checked (enabled),
unchecked (disabled)
Default: Checked (enabled)