CLI Guide
Table 73. Details of getsysinfo (continued)
NOTE: In the Chassis Information output, the PCIe Switch Board Type information
is displayed only for PowerEdge FX2s chassis model.
Examples
racadm getsysinfo -d
racadm getsysinfo -c
racadm getsysinfo -A
racadm getsysinfo -4
racadm getsysinfo -6
gettracelog
Table 74. Details of gettracelog
Description Lists all the trace log entries in CMC.
Synopsis • racadm gettracelog -i [-A]
• racadm gettracelog [-s <start>] [-c <count>] [--more] [-A] [-o]
Input • -i—Displays the number of entries in CMC trace log.
• - -more—Displays one screen at a time and prompts the user to continue (similar to the UNIX more
command).
• -o—Displays each entry in a single line.
• -c—Specifies the number of records to display.
• -s—Specifies the starting record to display.
• -A—Does not display headers or labels.
NOTE: The -A and -o options are deprecated.
Output The default output display shows the record number, timestamp, source, and description. The
timestamp begins at midnight, January 1 and increases until the system boots. After the system boots,
the timestamp of the system timestamp is used.
Example • Display entire log
racadm gettracelog
• Display number of records in log
racadm gettracelog -i
getversion
Table 75. Details of getversion
Description
Displays the current software version, model and generation information, and whether the target
device can be updated.
RACADM Subcommand Details 65