CLI Guide
ping6
Table 81. Details of
Description Veries that the destination IPv6 address is reachable from a CMC, or with the current routing-table
contents. A destination IPv6 address is required. An ICMP echo packet is sent to the destination IPv6
address based on the current routing-table contents.
To use this subcommand for CMC, you must have the Administrator privilege.
Synopsis
racadm ping6 <ipv6address>
Example
racadm iping6 192.168.0.2
IPING6 192.168.0.2 (192.168.0.2): 56 data bytes
64 bytes from 192.168.0.2: icmp_seq=0 ttl=121 time=2.9
ms
--- 192.168.0.2 ping statistics ---
1 packets transmitted, 1 packets received, 0 percent
packet loss
round-trip min/avg/max = 2.9/2.9/2.9 ms
racdump
Table 82. Details of racdump
Description This subcommand displays the comprehensive chassis status and conguration state information, and
historic event logs. Used for post-deployment conguration verication and during debugging
sessions.
To use this subcommand for CMC, you must have the CMC Login User privilege.
Synopsis
racadm racdump
Input Racdump includes the following subsystems and aggregates the following RACADM commands:
• General System/RAC information — getsysinfo
• Session information — getssinfo
• Sensor information — getsensorinfo
• Switches information (IO Module) — getioinfo
• Mezzanine card information (Daughter card) — getdcinfo
• All modules information — getmodinfo
• Power budget information — getpbinfo
• KVM information — getkvminfo
• NIC information (CMC module) — getniccfg
• Redundancy information — getredundancymode
• Trace log information — gettracelog
• RAC event log — getraclog
• System event log — getsel
68 RACADM Subcommand Details