User's Manual

106 Using the CMC Web Interface
Table 5-7 provides descriptions of the information provided on the Power
Supply Status
page.
Viewing Status of the Temperature Sensors
The Temperature Sensors Information page displays the status and readings
of the temperature probes on the entire chassis (chassis, servers, IOMs, and
iKVM).
NOTE: The temperature probes value cannot be edited. Any change beyond the
threshold will generate an alert that will cause the fan speed to vary. For example, if
the CMC ambient temperature probe exceeds threshold, the speed of the fans on
the chassis increase.
To view the health status of the temperature probes:
1
Log in to the CMC Web interface.
Table 5-7. Power Supply Health Status Information
Item Description
Name Displays the name of the PSU: PS-n, where n is the power supply
number.
Present Indicates whether the power supply is present (Yes or No).
Health OK Indicates that the PSU is present and
communicating with the CMC. Indicates that
the health of the PSU is OK. In the event of a
communication failure between the CMC and
the fan unit, the CMC cannot obtain or
display health status for the PSU.
Severe Indicates that the PSU has a failure and the
health is critical. Corrective action must be
taken immediately. Failure to do so may cause
the component to shutdown due to power loss.
Unknown Displayed with the chassis is first powered on.
In the event of a communication failure
between the CMC and the PSU, the CMC
cannot obtain or display health status for the
PSU.
Power Status Indicates the power state of the PSU: Online, Off, or Slot Empty.
Capacity Displays the power capacity in watts.