User's Manual

Using the CMC Web Interface 161
Use the following steps to view FlexAddress server information:
1
Log in to the Web interface (see "Accessing the CMC Web Interface" on
page 93).
2 Expand Servers in the system tree. All of the servers (1–16) appear in the
expanded
Servers list.
3 Click the server you want to view. The Server Status page displays.
4 Click the Setup tab, and the FlexAddress sub-tab. The FlexAddress Status
page is displayed. This page allows you to view the WWN configuration
and MAC addresses for the selected server.
The status page presents the following information:
FlexAddress
Enabled
Displays whether the FlexAddress feature is active or not active
for the particular slot.
Current State Displays the current FlexAddress configuration:
• Chassis-Assigned - selected slot address is chassis assigned using
the FlexAddress. The slot-based WWN/MAC addresses remain
the same even if a new server is installed.
•
Server-Assigned - server uses the server-assigned address or the
default address embedded into the controller hardware.
Power State Displays the current power status of the servers; values are: On,
Powering On, Powering Off, Off, and N/A (if a server is not
present).