Installation and Service Manual
Table Of Contents
- Dell EMC PowerEdge R750xs Installation and Service Manual
- Contents
- About this document
- PowerEdge R750xs system overview
- Initial system setup and configuration
- Minimum to POST and system management configuration validation
- Installing and removing system components
- Safety instructions
- Before working inside your system
- After working inside your system
- Recommended tools
- Optional front bezel
- System cover
- Drive backplane cover
- Optional optical drive
- Air shroud
- Cooling fans
- Side wall brackets
- Intrusion switch module
- Optional serial COM port
- Drives
- Drive backplane
- Cable routing
- System memory
- Processor and heat sink module
- Expansion cards and expansion card risers
- Optional IDSDM module
- MicroSD card
- Optional BOSS S2 card
- PERC
- Rear drive module
- Optional OCP card
- System battery
- Optional internal USB card
- Power supply unit
- Power interposer board
- System board
- Trusted Platform Module
- Control panel
- Jumpers and connectors
- System diagnostics and indicator codes
- Getting help
- Documentation resources
Air shroud............................................................................................................................................................................ 36
Removing the air shroud............................................................................................................................................36
Installing the air shroud..............................................................................................................................................36
Cooling fans........................................................................................................................................................................ 37
Removing a cooling fan.............................................................................................................................................. 37
Installing a cooling fan................................................................................................................................................ 38
Removing the cooling fan cage................................................................................................................................39
Installing the cooling fan cage..................................................................................................................................40
Removing the cooling fan cage board.....................................................................................................................41
Installing the cooling fan cage board...................................................................................................................... 42
Side wall brackets............................................................................................................................................................. 43
Removing the side wall bracket............................................................................................................................... 43
Installing the side wall bracket................................................................................................................................. 44
Intrusion switch module...................................................................................................................................................45
Removing the intrusion switch module.................................................................................................................. 45
Installing the intrusion switch...................................................................................................................................46
Optional serial COM port................................................................................................................................................. 47
Removing the optional serial COM port.................................................................................................................47
Installing the optional serial COM port ..................................................................................................................48
Drives................................................................................................................................................................................... 49
Removing a drive blank.............................................................................................................................................. 49
Installing a drive blank................................................................................................................................................ 50
Removing the drive carrier........................................................................................................................................50
Installing the drive carrier...........................................................................................................................................51
Removing the drive from the drive carrier............................................................................................................52
Installing the drive into the drive carrier................................................................................................................53
Drive backplane................................................................................................................................................................. 54
Drive backplane............................................................................................................................................................54
Removing the drive backplane ................................................................................................................................56
Installing the drive backplane................................................................................................................................... 57
Cable routing...................................................................................................................................................................... 58
System memory................................................................................................................................................................. 68
System memory guidelines........................................................................................................................................68
General memory module installation guidelines....................................................................................................69
Removing a memory module.....................................................................................................................................70
Installing a memory module........................................................................................................................................71
Processor and heat sink module.................................................................................................................................... 72
Removing the processor and heat sink module....................................................................................................72
Removing the processor............................................................................................................................................ 74
Installing the processor.............................................................................................................................................. 76
Installing the processor heat sink module..............................................................................................................79
Expansion cards and expansion card risers................................................................................................................. 81
Expansion card installation guidelines.....................................................................................................................82
Removing the expansion card risers.......................................................................................................................90
Installing the expansion card risers..........................................................................................................................91
Removing expansion card from the expansion card riser..................................................................................93
Installing an expansion card into the expansion card riser................................................................................ 95
Optional IDSDM module...................................................................................................................................................97
Removing the IDSDM module...................................................................................................................................97
Installing the IDSDM module..................................................................................................................................... 97
4
Contents