Reference Guide

aaa authorization config-commands
Set parameters that restrict (or permit) a user’s access to EXEC level commands.
C9000 Series
Syntax
aaa authorization config-commands
Disable authorization checking for CONFIGURATION level commands using the no
aaa authorization config-commands command.
Defaults Enabled when you configure aaa authorization commands command.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the E-Series.
Usage Information By default, the aaa authorization commands command configures the system
to check both EXEC level and CONFIGURATION level commands. Use the
command no aaa authorization config-commands to enable only EXEC-
level command checking.
aaa authorization exec
Set parameters that restrict (or permit) a user’s access to EXEC-level commands.
C9000 Series
Syntax
aaa authorization exec {name | default} {local || tacacs+ ||
if-authenticated || none}
To disable authorization checking for EXEC level commands, use the no aaa
authorization exec command.
Parameters
name Define a name for the list of authorization methods.
1808
Security