Reference Guide

Version Description
7.8.1.0 Introduced on the C-Series and S-Series.
Related
Commands
• private-vlan mode — sets the mode of the selected VLAN to community,
isolated, or primary.
• private-vlan mapping secondary-vlan — maps secondary VLANs to the selected
primary VLAN.
• show arp — displays the ARP table.
• show interfaces private-vlan — displays the type and status of the PVLAN
interfaces.
• show vlan private-vlan — displays the PVLANs and/or interfaces that are part of
a PVLAN.
• switchport mode private-vlan — sets PVLAN mode of the selected port.
private-vlan mode
Set PVLAN mode of the selected VLAN to community, isolated, or primary.
C9000 Series
Syntax
[no] private-vlan mode {community | isolated | primary}
To remove the PVLAN configuration, use the no private-vlan mode
{community | isolated | primary} command syntax.
Parameters
community Enter the keyword community to set the VLAN as a
community VLAN.
isolated Enter the keyword isolated to configure the VLAN as an
isolated VLAN.
primary Enter the keyword primary to configure the VLAN as a
primary VLAN.
Defaults none
Command Modes INTERFACE VLAN
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
1668
Private VLAN (PVLAN)