Administrator Guide

Enter the CAM profile name then the amount for CAM space allocation. The total
space allocated must be equal to 12. The IPv6 ACL range must be a factor of 2.
Enter l2acl and the FP block number for L2 ACL. The FP block number range is
from 1 to 8.
● 4: Creates 242 entries for use by the OpenFlow controller (256 total entries
minus the 14 entries reserved for internal functionality)
● 8: Creates 498 entries for use by the OpenFlow controller (512 total entries
minus the 14 entries reserved for internal functionality)
ipv4acl number
Enter ipv4acl and the FP block number for IPv4. The FP block number range is
from 0 to 8.
ipv6acl number
Enter ipv6acl and the FP block number for IPv6. The FP block number range is
from 0 to 4 (multiples of 2).
ipv4qos number
Enter ipv4qos and the FP block number for IPv4–QoS. The FP block number
range is from 0 to 8.
l2qos number
Enter l2qos and the FP block number for L2–QoS. The FP block number range is
from 1 to 8.
l2pt number
Enter l2pt and the FP block number for L2–Protocol tunneling. The FP block
number range is from 0 to 1.
ipmacacl number
Enter ipmacacl and the FP block number for IP-MAC ACL. The FP block number
range is from 0 to 6.
vman-qos
number
Enter vman-qos and the FP block number for Vman QoS. The FP block number
range is from 0 to 6.
ecfmacl number
Enter ecfmacl and the FP block number for ECFM ACL. The FP block number
range is from 0 to 5.
fcoeacl number
Enter fcoeacl and the FP block number for FCoE ACL. The FP block number
range is 0 to 6.
fedgovacl
number
Enter fedgovacl and the FP block number for Fed Gov ACL. The FP block
number range is 0 to .
nlbclusteracl
number
Enter nlbclusteracl and the FP block number for NLB Cluster ACL. The FP
block number range is 0 to 6.
ipv4pbr number
Enter ipv4pbr and the FP block number for IPv4 PBR ACL. The FP block number
range is 0 to 6.
iscsioptacl
number
Enter iscsioptacl and the FP block number for ISCSI optimization ACL. The FP
block number range is 0 to 6.
openflow number
Enter openflow and the FP block number for OpenFlow ACL. The FP block
number range is 0 to 6.
vrfv4acl number
Enter vrfv4acl and the FP block number for VRF ACL. The FP block number
range is 0 to 6.
Command Modes
CONFIGURATION
CONFIGURATION TERMINAL BATCH
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Control and Monitoring 65