Users Guide

13 Maintenance
256
13 Return the cover to the original position.
Note • Push the cover until it clicks into place.
14 Rotate the release lever clockwise to lock the
cover.
15 Close the front cover.
Note • If the front cover is not closed completely, a message appears and the machine will remain paused.
Replacing Staple Cartridge (for Finisher-B1)
When the optional Finisher-B1 is installed and the staple cartridge needs to be replaced, a
message appears on the touch screen. When the message appears, load a new staple case into
the staple cartridge.
Note • The use of staple cartridges not recommended by Dell may degrade quality and performance. Use
only staple cartridges recommended by Dell.
1 Make sure that the machine is not operating,
and open the finisher front cover.
2 Grasp the handle and pull out the staple
cartridge holder to the right, towards you.