Administrator Guide

13 Appendix
506
Extended Settings
Paper size 102 Sets the default paper size. Only available when [Paper tray] is set to [Auto] or
[Tray 5]. Only cut sheet can be set.
[4] (Default*) : A4
[5] : A5
[15] : B5
[99] : Auto
[101] (Default*) : A Size
Note • When Trays 1 to 4 is selected, [Paper size] cannot be set. The paper size
loaded in the specified tray is displayed.
• If [A Size] or [Auto] is selected, the settings become as follows:
- When [Document size] is set to other than [Auto], [Paper size] is set to A4.
- When Trays 1 to 4 is selected,
the paper size is determined by the size of
paper loaded in the tray, and thus [Paper size] cannot be set.
- Depending on the combination of [Document size] and
[Paper size], [?] may
be displayed for the magnification. In this case, the document is printed at
a scale of 100%.
Paper tray 103 Sets the paper tray to be used for printing.
[0] (Default) : Auto
[1] : Tray 1
[2] : Tray 2
[3] : Tray 3
[4] : Tray 4
[5] : Tray 5
Note • When Trays 1 to 4 is selected, the paper size is determined by the size of
paper loaded in the tray, and thus [Paper size] cannot be set.
• When [Auto] is selected and paper of the same size in the same orientation
in multiple trays is loaded, paper will be fed in the order of Tray 1 J Tray 2 J
Tray 3 J Tray 4. If paper of the same size is loaded in multiple trays but in
different orientations, feeding of the paper loaded in the landscape
orientation is prioritized.
Coordinate
rotation
104 Sets the paper orientation for printing.
[0] (Default) : 0 degree
[1] : 90 degree
Color mode 105 Sets the color mode.
[0] (Default) : Color
[1] : Grayscale
[2] : Black pen
Parameter Item No. Value
Parameter Item No. Value
Auto layout 106 Selects whether to perform auto layout of the document or not.
[0] (Default) : ON
[1] : OFF
Active palette 107 Selects whether to use a pen specified by command or set on the panel.
[0] (Default
) : Command
[1] : Panel
No. of prints 108 Sets the number of copy to be printed.
[1] - [250] (Default: 1) : 1 - 250