Administrator Guide

Status Code
427
027-513
[Cause] The machine failed to transfer data using SMB of the Scan to PC service because access
to the SMB server was not permitted.
When the server is Macintosh, a folder with the same name as the specified file name
may exist on the se
rver.
[Remedy] Consult your system administrator for settings.
027-514
[Cause] The machine failed to transfer data using SMB of the Scan to PC service because an error
has been occurred between the SMB server and the DNS server.
[Remedy] Check the following conditions:
• The SMB server is connected to the DNS server.
• The SMB server nam
e is registered on
the DNS server.
027-515
[Cause] The machine failed to transfer data using SMB of the Scan to PC service because an error
has been occurred.
[Remedy] Take the following measures:
• Set the DNS server address.
• Set the target SMB server address using IP
address.
027-516
[Cause] Probable causes are as follows:
1)The SMB server of the destination computer cannot
be found while transferring data
using SMB of the Scan to PC service (TCP/IP session establishment failed).
2)The SMB server specified as the destination does not respond to the machine while
tr
ansferring data using SMB of the Scan to
PC service.
3)Failed to name resolution of
the SMB server spe
cified as destination to transfer data
using SMB of the Scan to PC service.
[Remedy] Take one of the following measures:
1)Confirm the connection of the network cable.
- For communications over subnet, confirm the WINS
server settings, and check
whether the server address can
be resolved correctly.
- File Sharing service (communicating via port 137 (UDP), port 138 (UDP), and
por
t 139 (TCP)) is authorized for the Firewal
l settings of the destination SMB
server.
2)Check whether the file sharing service is enabled on the destination SMB server.
- File Sharing service for Microsoft Network is activated.
If the error still is not resolved, check the following setting.
- NetBIOS over TCP/IP for TCP/IP is activated.
3)Take one of the following measures:
- When the destination SMB server name is spe
cified usi
ng the FQDN (example:
mypc01.abc0.co.jp), confirm that the DNS server address is set correctly in the
Connectivity & Network Setup of the machine.
- If the connection with the DNS server has
any problem, check whether the
destina
tion server name set in the machine is registered on the DNS server.
027-518
[Cause] The machine failed to transfer data using SMB of the Scan to PC service because the
specified password was incorrect.
When the server is Macintosh, the specified user may not have been registered as a user
who is permitted to use Windows Sharing.
[Remedy]
Confirm the password for the shared folder.
When the server is Macintosh, specify a user who is permitted to use Windows Sharing.
Status Code Cause and Remedy