Administrator Guide

Interface Cables
19
Interface Cables
When you connect the machine directly to your computer, use the USB interface. When you
connect the machine to a network, use the Ethernet interface.
Using the USB Interface
The USB interface of the machine supports USB 2.0.
This section describes the installation procedures for the USB interface.
1 Press the power switch to the [ ] position to switch off the power.
2 Make sure that the touch screen is blank and the <Power Saver> button is not lit.
3 Press the main power switch to the [ ] position to switch off the main power.
4 Connect the USB cable to the USB 2.0
interface connector.
5 Connect the other end of the USB cable to the computer.
6 Press the main power switch to the [ | ] position to switch on the main power.
7 Press the power switch to the [ | ] position to switch on the power.
8 Restart the computer.
For more information on setting items, refer to "Printer Environment Settings" (P.261).
Using the Ethernet Interface
The Ethernet interface of the machine supports the following three types.
• 1000BASE-T
•100BASE-TX
•10BASE-T
This section describes the installation proced
ures for the Ethernet interface.
1 Press the power switch to the [ ] position to switch off the power.
2 Make sure that the touch screen is blank and the <Power Saver> button is not lit.
3 Press the main power switch to the [ ] position to switch off the main power.